https://ignition-control-module.info Wed, 15 Jul 2026 05:01:51 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/ https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/#comments Tue, 14 Jul 2026 17:00:46 +0000 https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/

















High Quality 780-502 / DS845 Series Replacement 24V Direct Spark Ignition Control Module. 780-502 & DS845 Series. The 780-502 direct spark ignition control is designed as a direct replacement for Robertshaw 780 series intermittent pilot and direct ignition systems. It works with both standard and advanced flame sensing setups. When the thermostat calls for heat, the module provides a high-voltage spark to light the pilot or main burner. If a flame is not sensed within the allowed trial period, the module enters safety lockout to prevent unburned gas from accumulating. This specific module is a non-pre-purge unit, meaning it sparks immediately upon a call for heat without a delay blower cycle. It is universally applicable across a broad range of low-voltage (24 VAC) residential and light commercial gas systems, including gas-fired heating systems, commercial cooking equipment, water heating systems, and gas fireplaces. Built with durable housing for long-lasting performance, it is tested for durability with a high anti-interference margin and wide environmental tolerance. Includes: 1x Ignition Control Module, 2x Mounting Screws, and Double-Sided 3M Tape. (You will receive the exact part shown in the photos). ? PRO INSTALLATION TIP: Verify Your Voltage & Purge Settings! Ensure your system uses a 24 VAC power supply. This module is NOT compatible with line-voltage (120V) or millivolt systems. Additionally, do not use it in systems that explicitly require a pre-purge timing window for safety, as this board is designed for immediate spark. Diagnostic LED: An integrated LED indicator helps technicians quickly identify flame sense, spark, and system status. Versatile Flame Sensing: Supports both local (single-rod combination spark/sense) and remote (dual-rod separate spark and sense) configurations. Lockout Recovery: Features automatic lockout recovery to seamlessly manage safety sequences. Direct Plug-In: Plugs straight in with no wiring changes needed, saving time and cost on the job. Direct cross-reference replacement for the following OEM modules. Nationwide (OE Grade Direct Replacement). 24 VAC, 50/60 Hz. 250 AMP + Valve at 24 VAC. 1.5 AMP at. Please feel free to send a message.

]]> https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/feed/ 0 https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/ https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/#comments Fri, 03 Jul 2026 16:38:41 +0000 https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/




UTEC 1016-500 Direct Spark Ignition Control Module. Genuine UTEC 1016 Series OEM direct spark ignition control module for commercial and residential gas-fired HVAC equipment. OEM Part Number: 102186-01. Direct Spark Ignition (DSI). Input Voltage: 24 VAC. Maximum Current: 250 mA. ANSI Z21.20 Certified. OEM HVAC replacement control. New surplus / open box. Includes mounting screws shown.

]]> https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/feed/ 0 https://ignition-control-module.info/2025/12/ignition-control-module-bgn891-1c-direct-fit-for-lennox-60j00-g891tca-8103/ https://ignition-control-module.info/2025/12/ignition-control-module-bgn891-1c-direct-fit-for-lennox-60j00-g891tca-8103/#comments Mon, 15 Dec 2025 01:17:44 +0000 https://ignition-control-module.info/2025/12/ignition-control-module-bgn891-1c-direct-fit-for-lennox-60j00-g891tca-8103/



The Ignition Control Module BGN891-1C is a direct fit replacement for Lennox 60J00 G891TCA-8103. Specifically designed for LENNOX brand compatibility, this module is a reliable and efficient component for controlling ignition in heating systems. With a focus on quality and precision, the BGN891-1C is a crucial part for maintaining the performance and durability of Lennox heating systems. Ideal for those seeking a straightforward and effective solution for their ignition control needs. Compatible with models 87F22, 86H30, 77C38.

]]> https://ignition-control-module.info/2025/12/ignition-control-module-bgn891-1c-direct-fit-for-lennox-60j00-g891tca-8103/feed/ 0 https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/ https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/#comments Thu, 11 Dec 2025 01:09:42 +0000 https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/



Absolutely perfect condition guaranteed, brand new. Nothing but the best quality merchandise and parts guaranteed. The UTEC 1016 Series OEM Part LENNOX 49W66 Direct Spark Ignition Control Module is a high-quality ignition control board designed for use with most LENNOX models. This module is designed to be compatible with corded electric and gas power sources, and features a voltage of 24V and an amperage of 60A. Made with mixed parts, this unit has a thickness of 1/2 inch and dimensions of 7 inches in length, 4 inches in width, and 1/2 inch in height. With a weight of 8 ounces, this ignition control module is a reliable and efficient component for HVAC and refrigeration systems.

]]> https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/feed/ 0 https://ignition-control-module.info/2025/09/resideo-direct-ignition-control-module-s89f/ https://ignition-control-module.info/2025/09/resideo-direct-ignition-control-module-s89f/#comments Tue, 02 Sep 2025 05:48:41 +0000 https://ignition-control-module.info/2025/09/resideo-direct-ignition-control-module-s89f/



Resideo Direct Ignition Control Module S89F? .

]]> https://ignition-control-module.info/2025/09/resideo-direct-ignition-control-module-s89f/feed/ 0 https://ignition-control-module.info/2025/07/robertshaw-780-502-ignition-control-module-ds845-direct-spark-replacement-board/ https://ignition-control-module.info/2025/07/robertshaw-780-502-ignition-control-module-ds845-direct-spark-replacement-board/#comments Tue, 01 Jul 2025 15:36:58 +0000 https://ignition-control-module.info/2025/07/robertshaw-780-502-ignition-control-module-ds845-direct-spark-replacement-board/




Robertshaw 780-502 Ignition Control Module – DS845 Direct Spark Board. Ignition Control Module – DS845 Series. Direct Spark Ignition (DSI). The Robertshaw 780-502 is a high-quality ignition control module designed for direct spark ignition systems. It ensures safe and reliable operation in heating appliances such as gas furnaces, boilers, and other compatible units. With durable components and integrated diagnostics, this module is trusted in both residential and light commercial applications. Direct Spark Ignition (DSI) for gas heating systems. Compatible with 24V AC applications. DS845 Series replacement board. Surface mount design for easy installation. Built-in LED diagnostics for system status and troubleshooting. Stable and reliable ignition performance. Control Type: Electronic Ignition Module. Application: Gas furnaces, boilers, heaters. Note: This ignition control module is designed for residential and light commercial use only. It is not intended for industrial heavy-duty applications. Always confirm compatibility with your system before installation.

]]> https://ignition-control-module.info/2025/07/robertshaw-780-502-ignition-control-module-ds845-direct-spark-replacement-board/feed/ 0 https://ignition-control-module.info/2024/02/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition-2/ https://ignition-control-module.info/2024/02/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition-2/#comments Wed, 14 Feb 2024 10:07:58 +0000 https://ignition-control-module.info/2024/02/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition-2/






Robertshaw 780-502 Ignition Module Intermittent Pilot 24V Direct Spark Ignition DS 845. The Robertshaw 780 Series Direct Spark Controls Are Applicable To Commercial Cooking Equipment, Gas Fired Heating, And W. The System Acts On A Demand For Heat By A Switch Or Thermostat To Open The Gas Valve. At The Same Time, The 780 Series Ignition Control Supplies A Spark To The Electrode Which Ignites The Gas. After The Gas Is Lit, An Electronic Circuit Proves The Presence Of Flame Using Flame Rectification. When The Thermostat Is Satisfied, The Gas Valve Will Be Closed To Shut Off The Main Burner Gas. Weight : 1.1 LBR Model : DS845 UPC-EAN : 662013216931. This part replaces original part numbers and models no limited to.

]]> https://ignition-control-module.info/2024/02/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition-2/feed/ 0 https://ignition-control-module.info/2024/02/renzor-195573-replacement-direct-spart-ignition-control-module/ https://ignition-control-module.info/2024/02/renzor-195573-replacement-direct-spart-ignition-control-module/#comments Fri, 02 Feb 2024 09:03:43 +0000 https://ignition-control-module.info/2024/02/renzor-195573-replacement-direct-spart-ignition-control-module/


Direct Spark Ignition (DSI) control board. Cooling and heating fan outputs. Controls inducer motor, blower motor, air cleaner (if equipped), spark igniter & gas valve. Monitors timing, trial for ignition, system switches, flame sensing and lockout. Compatible with LP or natural gas. LED indication for status and fault codes to aid in troubleshooting. ICM CONTROLS ICM2906 DIRECT SPARK IGNITION (DSI) CONTROL BOARD.

]]> https://ignition-control-module.info/2024/02/renzor-195573-replacement-direct-spart-ignition-control-module/feed/ 0 https://ignition-control-module.info/2024/01/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition/ https://ignition-control-module.info/2024/01/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition/#comments Wed, 31 Jan 2024 20:56:17 +0000 https://ignition-control-module.info/2024/01/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition/






Robertshaw 780-502 Ignition Module Intermittent Pilot 24V Direct Spark Ignition DS 845. The Robertshaw 780 Series Direct Spark Controls Are Applicable To Commercial Cooking Equipment, Gas Fired Heating, And W. The System Acts On A Demand For Heat By A Switch Or Thermostat To Open The Gas Valve. At The Same Time, The 780 Series Ignition Control Supplies A Spark To The Electrode Which Ignites The Gas. After The Gas Is Lit, An Electronic Circuit Proves The Presence Of Flame Using Flame Rectification. When The Thermostat Is Satisfied, The Gas Valve Will Be Closed To Shut Off The Main Burner Gas. Weight : 1.1 LBR Model : DS845 UPC-EAN : 662013216931. This part replaces original part numbers and models no limited to.

]]> https://ignition-control-module.info/2024/01/robertshaw-780-502-ignition-module-intermittent-pilot-24v-direct-spark-ignition/feed/ 0 https://ignition-control-module.info/2021/03/baso-bgn891-2-direct-spark-ignition-control-module-y4749-lennox-pulse/ https://ignition-control-module.info/2021/03/baso-bgn891-2-direct-spark-ignition-control-module-y4749-lennox-pulse/#comments Fri, 05 Mar 2021 19:31:44 +0000 http://ignition-control-module.info/2021/03/baso-bgn891-2-direct-spark-ignition-control-module-y4749-lennox-pulse/








Baso BGN891-2 Direct Spark Ignition Control Module Y4749 Lennox Pulse. Please m ake sure it is what you need. Please contact a certified technician if needed. I do combine orders. Just place items in your cart. If you want to send it to another location change. Please ask questions before purchasing. New items must not be opened or used, if returning. Do not remove plastic wraps or sealed labels. If new and sealed. Once opened it is now used. Any issues please contact me. For discounts Sign up for my newsletter. The item “Baso BGN891-2 Direct Spark Ignition Control Module Y4749 Lennox Pulse” is in sale since Monday, November 16, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration\ Parts & Accessories\HVAC & Refrigeration\ Controls & Circuit Boards”. The seller is “brucevfr800″ and is located in Manahawkin, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Belgium, Ireland, Netherlands, Poland, Spain, Austria, Bahamas, New Zealand, Switzerland, Norway, Ukraine, Croatia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Cayman islands, Liechtenstein, Luxembourg, Monaco, Martinique, Nicaragua, Paraguay, Uruguay.

• Model: Y4749
• Country/Region of Manufacture: United States
• Item Width: na
• Compatible Brand: For LENNOX
• Power Source: Gas
• Type: Ignition Control Board
• Compatible Model: Lennox
• Compatible Product: Central Furnace
• Item Thickness: na
• MPN: BGN891-2
• Item Length: na
• Item Weight: 1 lb
• Brand: LENNOX
• Amperage: na
• Voltage: 24 V

]]> https://ignition-control-module.info/2021/03/baso-bgn891-2-direct-spark-ignition-control-module-y4749-lennox-pulse/feed/ 0