https://ignition-control-module.info Wed, 15 Jul 2026 05:01:51 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/ https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/#comments Tue, 14 Jul 2026 17:00:46 +0000 https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/

















High Quality 780-502 / DS845 Series Replacement 24V Direct Spark Ignition Control Module. 780-502 & DS845 Series. The 780-502 direct spark ignition control is designed as a direct replacement for Robertshaw 780 series intermittent pilot and direct ignition systems. It works with both standard and advanced flame sensing setups. When the thermostat calls for heat, the module provides a high-voltage spark to light the pilot or main burner. If a flame is not sensed within the allowed trial period, the module enters safety lockout to prevent unburned gas from accumulating. This specific module is a non-pre-purge unit, meaning it sparks immediately upon a call for heat without a delay blower cycle. It is universally applicable across a broad range of low-voltage (24 VAC) residential and light commercial gas systems, including gas-fired heating systems, commercial cooking equipment, water heating systems, and gas fireplaces. Built with durable housing for long-lasting performance, it is tested for durability with a high anti-interference margin and wide environmental tolerance. Includes: 1x Ignition Control Module, 2x Mounting Screws, and Double-Sided 3M Tape. (You will receive the exact part shown in the photos). ? PRO INSTALLATION TIP: Verify Your Voltage & Purge Settings! Ensure your system uses a 24 VAC power supply. This module is NOT compatible with line-voltage (120V) or millivolt systems. Additionally, do not use it in systems that explicitly require a pre-purge timing window for safety, as this board is designed for immediate spark. Diagnostic LED: An integrated LED indicator helps technicians quickly identify flame sense, spark, and system status. Versatile Flame Sensing: Supports both local (single-rod combination spark/sense) and remote (dual-rod separate spark and sense) configurations. Lockout Recovery: Features automatic lockout recovery to seamlessly manage safety sequences. Direct Plug-In: Plugs straight in with no wiring changes needed, saving time and cost on the job. Direct cross-reference replacement for the following OEM modules. Nationwide (OE Grade Direct Replacement). 24 VAC, 50/60 Hz. 250 AMP + Valve at 24 VAC. 1.5 AMP at. Please feel free to send a message.

]]> https://ignition-control-module.info/2026/07/universal-24v-direct-spark-ignition-control-module-replaces-robertshaw-780-502/feed/ 0 https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/ https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/#comments Fri, 03 Jul 2026 16:38:41 +0000 https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/




UTEC 1016-500 Direct Spark Ignition Control Module. Genuine UTEC 1016 Series OEM direct spark ignition control module for commercial and residential gas-fired HVAC equipment. OEM Part Number: 102186-01. Direct Spark Ignition (DSI). Input Voltage: 24 VAC. Maximum Current: 250 mA. ANSI Z21.20 Certified. OEM HVAC replacement control. New surplus / open box. Includes mounting screws shown.

]]> https://ignition-control-module.info/2026/07/utec-1016-500-direct-spark-ignition-control-module-24vac-hvac-102186-01/feed/ 0 https://ignition-control-module.info/2026/06/msd-6al-ignition-control-module-6420-multiple-spark-discharge-2/ https://ignition-control-module.info/2026/06/msd-6al-ignition-control-module-6420-multiple-spark-discharge-2/#comments Wed, 10 Jun 2026 15:14:41 +0000 https://ignition-control-module.info/2026/06/msd-6al-ignition-control-module-6420-multiple-spark-discharge-2/


The MSD 6AL Ignition Control Module 6420 is a high-performance ignition module designed for car and truck enthusiasts. The front placement on the vehicle makes installation easy, and the performance part designation indicates that it is designed to enhance overall engine output. SUPER POWER FOR YOU ENGINE.

]]> https://ignition-control-module.info/2026/06/msd-6al-ignition-control-module-6420-multiple-spark-discharge-2/feed/ 0 https://ignition-control-module.info/2026/04/oh-no-this-obsolete-engine-has-no-spark-what-do-we-do/ https://ignition-control-module.info/2026/04/oh-no-this-obsolete-engine-has-no-spark-what-do-we-do/#comments Mon, 27 Apr 2026 01:33:48 +0000 https://ignition-control-module.info/2026/04/oh-no-this-obsolete-engine-has-no-spark-what-do-we-do/ ]]> https://ignition-control-module.info/2026/04/oh-no-this-obsolete-engine-has-no-spark-what-do-we-do/feed/ 0 https://ignition-control-module.info/2026/03/msd-6al-ignition-control-module-6420-multiple-spark-discharge/ https://ignition-control-module.info/2026/03/msd-6al-ignition-control-module-6420-multiple-spark-discharge/#comments Tue, 31 Mar 2026 23:00:31 +0000 https://ignition-control-module.info/2026/03/msd-6al-ignition-control-module-6420-multiple-spark-discharge/



Used MSD6AL ignition box. Any questions please ask.

]]> https://ignition-control-module.info/2026/03/msd-6al-ignition-control-module-6420-multiple-spark-discharge/feed/ 0 https://ignition-control-module.info/2026/03/no-spark-troubleshooting-mopar-electronic-ignition-with-ballast-resistor/ https://ignition-control-module.info/2026/03/no-spark-troubleshooting-mopar-electronic-ignition-with-ballast-resistor/#comments Mon, 02 Mar 2026 07:33:33 +0000 https://ignition-control-module.info/2026/03/no-spark-troubleshooting-mopar-electronic-ignition-with-ballast-resistor/ ]]> https://ignition-control-module.info/2026/03/no-spark-troubleshooting-mopar-electronic-ignition-with-ballast-resistor/feed/ 0 https://ignition-control-module.info/2026/02/wiring-and-sequence-of-operation-of-a-spark-ignition-gas-furnace/ https://ignition-control-module.info/2026/02/wiring-and-sequence-of-operation-of-a-spark-ignition-gas-furnace/#comments Sat, 21 Feb 2026 19:16:34 +0000 https://ignition-control-module.info/2026/02/wiring-and-sequence-of-operation-of-a-spark-ignition-gas-furnace/ ]]> https://ignition-control-module.info/2026/02/wiring-and-sequence-of-operation-of-a-spark-ignition-gas-furnace/feed/ 0 https://ignition-control-module.info/2026/01/99-honda-civic-no-spark-diagnosis-with-a-test-light/ https://ignition-control-module.info/2026/01/99-honda-civic-no-spark-diagnosis-with-a-test-light/#comments Sun, 25 Jan 2026 18:11:52 +0000 https://ignition-control-module.info/2026/01/99-honda-civic-no-spark-diagnosis-with-a-test-light/ ]]> https://ignition-control-module.info/2026/01/99-honda-civic-no-spark-diagnosis-with-a-test-light/feed/ 0 https://ignition-control-module.info/2026/01/1996-1997-isuzu-rodeo-trooper-ignition-control-module-3-2l-v6-igniter-spark/ https://ignition-control-module.info/2026/01/1996-1997-isuzu-rodeo-trooper-ignition-control-module-3-2l-v6-igniter-spark/#comments Fri, 09 Jan 2026 14:10:42 +0000 https://ignition-control-module.info/2026/01/1996-1997-isuzu-rodeo-trooper-ignition-control-module-3-2l-v6-igniter-spark/





This came of a 1996 Isuzu Trooper. Do note that this is a used item so it will have some light wear. It is ultimately your responsibility to ensure this item is a proper fit to your vehicle. Please ask if you believe the description does not reflect what’s showed on the pictures so we can ensure it is the correct item. All sales are final! If you have any questions whatsoever please feel free to ask.

]]> https://ignition-control-module.info/2026/01/1996-1997-isuzu-rodeo-trooper-ignition-control-module-3-2l-v6-igniter-spark/feed/ 0 https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/ https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/#comments Thu, 11 Dec 2025 01:09:42 +0000 https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/



Absolutely perfect condition guaranteed, brand new. Nothing but the best quality merchandise and parts guaranteed. The UTEC 1016 Series OEM Part LENNOX 49W66 Direct Spark Ignition Control Module is a high-quality ignition control board designed for use with most LENNOX models. This module is designed to be compatible with corded electric and gas power sources, and features a voltage of 24V and an amperage of 60A. Made with mixed parts, this unit has a thickness of 1/2 inch and dimensions of 7 inches in length, 4 inches in width, and 1/2 inch in height. With a weight of 8 ounces, this ignition control module is a reliable and efficient component for HVAC and refrigeration systems.

]]> https://ignition-control-module.info/2025/12/utec-1016-series-oem-part-lennox-49w66-direct-spark-ignition-control-module/feed/ 0